BORE WATER LEVEL CONTROLLERS
SEMI – Automatic water level controller

FEATURES:

  • Manual ON and Auto OFF controller
  • Real time DRY RUN protection available
  • Dry run cut off in 3 Minutes while starting and 30 seconds while running
  • Indication for Power ON, Flow/Dry run, tank High level and Motor status
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Relay : SSD 30A
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for JET motor, Compressor motor, Open well submersible and Bore Submersible (Both single phase and three phase)
ECO – Automatic water level controller

FEATURES:

  • Auto ON and Auto OFF controller
  • Indication for Power ON, High level, Low level and Motor status
  • Auto / Manual Over ride included
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Relay : SSD 30A
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for JET motor, Compressor motor & Open well submersible motor.
  • Fit for Switch or MCB control motors
OW – Automatic water level controller

FEATURES:

  • Auto ON and Auto OFF controller
  • Real time DRY RUN Prevention
  • Dry run cut off in 3 Minutes while starting and 30 seconds while running
  • Indication for Power ON, Flow/DRY RUN, High level & Low level
  • Auto / Manual Over ride included
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Relay : SSD 30A
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for JET motor, Compressor motor & Open well submersible motor.
  • Fit for Switch or MCB control motors
1T – Fully Automatic water level controller

FEATURES:

  • Auto ON and Auto OFF controller
  • Real time DRY RUN Prevention
  • Dry run cut off in 3 Minutes while starting and 30 seconds while running
  • One hour Auto reset when Dry run cut off happens. No need of manual reset.
  • Indication for Power ON, Flow/DRY RUN, High level & Low level
  • 16 A MCB for Over load & Short circuit prevention
  • Auto / Manual Over ride included
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Relay : SSD 30A
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for JET motor, Compressor motor & Open well submersible motor.
  • Can be used us Open well submersible starter
  • Fit for Switch or MCB control motors

1T with Timer – Fully Automatic water level controller

FEATURES:

  • Auto ON and Auto OFF controller
  • Current based DRY RUN Prevention
  • Dry run cut off in 30 seconds while running
  • Adjustable cyclic timer operation. (on time and off time setting)
  • Digital display shows Voltage, current, time and type of fault occur (OL and UL)
  • Indication for Power ON, Auto/Manual, High level & Low level, ON & OFF time.
  • 16 A MCB for Over load & Short circuit prevention
  • Auto / Manual Over ride included
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Display: 1.5” 7 segment LED Display
  • Relay : SSD 30A
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for JET motor, Compressor motor & Open well submersible motor.
  • Can be used us Open well submersible starter
  • Fit for Switch or MCB control motors
UNIVERSAL – Fully Automatic water level controller
[SUBMERSIBLE PUMP CONTROLLER]

FEATURES:

  • Auto ON and Auto OFF controller
  • Real time DRY RUN Prevention
  • Dry run cut off in 3 Minutes while starting and 30 seconds while running
  • One hour Auto reset when Dry run cut off happens. No need of manual reset.
  • Indication for Power Flow/Dry run, Upper tank, Sump tank.
  • Auto / Manual Over ride included
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Relay : SSD 40A
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for all type of water pumps including submersible motor
  • Fit for both single and three phase motors – Commercial model

SUMP WATER LEVEL CONTROLLERS
2T – Automatic water level controller
[Single phase sump motor control]

FEATURES:

  • Auto ON and Auto OFF controller
  • Real time Dual DRY RUN Prevention
  • Dry run cut off in 3 Minutes while starting and 30 seconds while running
  • Indication for Power ON, Auto/Manual, Flow/DRY RUN, High level & Low level for OHT & SUMP
  • 16 A MCB for Over load & Short circuit prevention
  • Auto / Manual Over ride included with additional Reset button
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Relay : SSD 30A
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for Mono block & Open well submersible motor.
  • Can be used us Open well submersible starter
  • Fit for Switch or MCB control motors
2T Digital – Automatic water level controller
[Single phase sump motor control]

FEATURES:

  • Auto ON and Auto OFF controller
  • Real time Dual DRY RUN Prevention
  • Dry run cut off 30 seconds while running
  • Indication for Power ON, Auto/Manual, Flow/DRY RUN, High level & Low level for OHT & SUMP
  • START & STOP push button for manual over ride
  • 16 A MCB for Over load & Short circuit prevention
  • Auto / Manual Over ride included with additional Reset button
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Relay : SSD 30A
  • Display: 1.5” 7 segment LED Display
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for Mono block & Open well submersible motor.
  • Can be used us Open well submersible starter at sewage treatment plant
  • Fit for Switch or MCB control motors
UNIVERSAL – Fully Automatic water level controller
[Three phase sump motor control]

FEATURES:

  • Auto ON and Auto OFF controller
  • Real time DRY RUN Prevention for OHT and SUMP
  • Dry run cut off in 3 Minutes while starting and 30 seconds while running
  • One hour Auto reset when Dry run cut off happens. No need of manual reset.
  • Indication for Power Flow/Dry run, Upper tank, Sump tank.
  • Auto / Manual Over ride included
  • Customization possible

SPECIFICATIONS:

  • Input Voltage: 230V, 50Hz
  • Relay : SSD 40A
  • Sensors Operating Voltage: 6V High Frequency Sensing
  • AC Voltage Regulation: 160V-270V
  • Sensors Make: SS304
  • Cabin Material: ABS
  • Operating Principle: Conductivity

APPLICATIONS:

  • Fit for all type of water pumps including submersible motor
  • Fit for both single and three phase motors – Commercial model